Please read ALL the information below before you buy!
These are modular cables with tailored lengths for our cases. They can be used with both the Xproto and Xproto-L.
Cable lengths:-200mm motherboard 24-pin ATX cable-350mm CPU 8-pin ATX/EPS cable-300mm GPU 8-pin PCIe cables-250mm SATA power cables
Type B cables are approximately 80mm longer than Type A.
If you order this product along with an Xproto / Xproto-L, there will not be an added shipping charge.
Warning: These may only be used with Corsair PSUs. The PSU side pinout is Corsair Type 4.
RM x SeriesRM i SeriesHX SeriesSF Series
Note that the following series cannot use:
RM SeriesAX i SeriesHX i Series
You can add an 8-pin cable for the GPU to your order for $3. Please let us know in your order what colour you want it in. You will need it if your GPU requires x3 8-pin PCIe power connectors (such as the 3090 FTW3). Please let us know if you wish to order any additional cables, such as a second CPU 8-pin if you are using an X299 motherboard.Make sure you order the correct type. Below is a chart:
SilverThese cables are comprised of a silver-plated copper core with a transparent Teflon insulation layer. Thin but rigid wires.
WhiteThese cables consist of silicone coated high-quality wiring. The silicone insulation is very soft and easy to bend. These flexible cables are suitable for tough wiring runs difficult to manage.
BlackThese cables consist of silicone coated high-quality wiring. The silicone insulation is very soft and easy to bend. These flexible cables are suitable for tough wiring runs difficult to manage.
More pictures below.
Warning: Some purchasers have reported that customs duties were charged. You may have to pay customs duties or a similar import tax depending on your country’s import regulations. If you have special requirements to declare, please let us know in your order.
Note: If you wish to add more products to your order (such as an AIO mount plate), please place a new order and choose the “free shipping” option.
Shipping time: Once the order is confirmed and ready to ship, XTIA will send you a confirmation email. The order will be sent out and we will send you the tracking number through another email within a few days. The whole process normally takes around 3-5 business days.
Shipping region costs: To request a quote of postal costs for countries and regions not listed, please contact us via email at email@example.com.
Cancelling an order: Please send an email to firstname.lastname@example.org and provide your order number to request a cancellation. Your order can only be cancelled before it is shipped, and we cannot guarantee we can cancel your order successfully. There may be a cancellation fee if your order is unusual or custom.
If you have any questions or concerns, please contact us through one of the following:
XTIA Official SITE is XTIA.COM.CN XTIA.TECH is a backup site
Review by Optimum Tech
XTIA “Butterfly” Structure
The specially designed intermediate mezzanine (Zone C) can be used as a cable management area and also contains a hard drive mount point.
The Butterfly design provides high structural integrity and an aesthetically pleasing modular design.
Three Segment Case Assembly
Zone A: PSU & motherboard
Zone B: GPU & power switch
Zone C: cable caddy, hard drives
Modified Open “Sandwich” Case Layout
The open chassis has much better heat dissipation, leading to improved gaming performance. Because of better thermals for your components, you can dial down your fan curves to keep noise at a minimum. It also negates any noise-creating turbulence caused by side panels.
The open-air layout has no dead corners for dust to accumulate, and any dust can be easily cleaned off.
Display your beautiful hardware, viewable at a glance.
Fully CNC Machined
The case is CNC machined from thick, sturdy 4mm aluminum panels, allowing the case to be both lightweight and steady.
The case is a nearly unibody design, allowing for easy assembly as well as elegant rounded corners.